Results 1 to 3 of 3

Thread: RD400PDL2 user settings ??

  1. #1
    Member GroundScope's Avatar
    Join Date
    Apr 2011
    Location
    Melbourne, Australia
    Posts
    49
    Rep Power
    10

    Default RD400PDL2 user settings ??

    I bought an old ebay RD400PDL as a backup to my RD4000PXL, Nice , Think I'll probably find myself using it more than the 4000 , quite a bit lighter too !!

    Anyone know how to get into the menu ??
    I want to change depth from inches to millileters

  2. #2
    Member
    Join Date
    Jun 2010
    Location
    Miskonsing
    Posts
    31
    Years of Experience
    18
    Rep Power
    11

    Default Re: RD400PDL2 user settings ??

    Been a while but try holding down the shift button and then depressing the depth button.

  3. #3
    Member GroundScope's Avatar
    Join Date
    Apr 2011
    Location
    Melbourne, Australia
    Posts
    49
    Rep Power
    10

    Default Re: RD400PDL2 user settings ??

    thanks ihoby,

    that did not work, but I found the answer, I'll paste it here incase somone else needs to know

    1 hold down the line sonde button then turn the unit on keep holding down
    the line sonde until the screen shows a gb that is the language setting hit
    the f button that will accept the language the next screen will be current
    hit the up and down arrow until it hits DB hit the f button next screen will
    be measurements hit arrow button until you see cm hit the f button next
    screen will be 50 60 hit the f button until you see 50 cycle hit the f
    button next screen will be passive on or off leave it on then hit the f
    button unit should shut of then turn it back on and see if it took all the
    settings, if you screw it up start all over!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
A 'Rook Media' Website