Welcome to the Utility Locating Forum.

Welcome to TheCableVine.com

CLICK HERE TO REGISTER! It takes about 30 seconds and its free. (And this message disappears)

We are a Utility Locating website and Community. our goal is to become the best source for utility locators on the internet. We are visited by locating experts and novices alike from all over the world. Register today and join us. There are plenty of discussions you can join in the forums. Registering gives you access to other forums not visible to unregistered visitors.


+ Reply to Thread
Page 2 of 3 FirstFirst 123 LastLast
Results 16 to 30 of 34
  1. #16
    Senior Member underground quester is on a distinguished road
    Join Date
    May 2008
    Location
    Alberta, Canada
    Posts
    924
    Rep Power
    14

    Default Re: tolerance and times

    Quote Originally Posted by Goldenboy View Post
    In the old forum we had covered just about all 50 states with the tolerance zones. If you can add your zones we'll see if we can get them all again.

    Just copy and paste and add your states tolerances.

    Alberta Canade--------39 inches---------------48 hours
    Florida-----------------24 inches---------------48 hours
    Georgia----------------24 inches---------------48 hours
    Illinois----------------18 inches----------------48 hours
    Indiana---------------24 inches----------------48 hours
    Michigan--------------18 inches----------------72 hours
    Minnesota------------24 inches----------------48 hours
    North Carolina---------30 inches----------------48 hours
    Texas----------------18 inches----------------48 hours
    Utah-----------------24 inches----------------48 hours
    Virginia---------------24 inches----------------48 hours
    Wisconsin------------18 inches----------------72 hours
    Wyoming-------------24 inches----------------48 hours

    Holy crap! Better keep the tolerances a secret from our 1 call consortium!
    Success is a journey, not a destination...

  2. #17
    Moderator Goldenboy is a jewel in the roughGoldenboy is a jewel in the roughGoldenboy is a jewel in the roughGoldenboy is a jewel in the rough
    Join Date
    May 2008
    Location
    Wisconsin
    Posts
    1,271
    Rep Power
    20

    Default Re: tolerance and times

    bump

  3. #18
    Senior Member ProfessionalLocator will become famous soon enough
    Join Date
    Dec 2009
    Location
    Maryland
    Posts
    1,218
    Rep Power
    15

    Default Re: tolerance and times

    Quote Originally Posted by Goldenboy View Post
    Alberta Canade--------39 inches---------------48 hours
    Florida-----------------24 inches---------------48 hours
    Georgia----------------24 inches---------------48 hours
    Illinois----------------18 inches----------------48 hours
    Indiana---------------24 inches----------------48 hours
    Michigan--------------18 inches----------------72 hours
    Minnesota------------24 inches----------------48 hours
    North Carolina---------30 inches----------------48 hours
    South Dakota----------18 inches----------------48 hours
    Ohio------------------18 inches----------------48 hours
    Oklahoma-------------24 inches----------------48 hours
    Texas----------------18 inches----------------48 hours
    Utah-----------------24 inches----------------48 hours
    Virginia---------------24 inches----------------48 hours
    Wisconsin------------18 inches----------------72 hours
    Wyoming-------------24 inches----------------48 hours
    Maryland ------------18 inches -------------- 48 hours PLUS a 24 or 48 Hr extension as locator needs it
    Maryland
    Montgomery County 36 inches -------------- 48 hours PLUS a 24 or 48 Hr extension as locator needs it

  4. #19
    Mke
    Mke is offline
    Senior Member Mke will become famous soon enoughMke will become famous soon enough
    Join Date
    Oct 2008
    Posts
    844
    Blog Entries
    4
    Rep Power
    13

    Default Re: tolerance and times

    24" and 48hrs for both wasington and Oregon

  5. #20
    Senior Member MIG4000 is an unknown quantity at this point
    Join Date
    Nov 2008
    Location
    MISSISSIPPI
    Posts
    116
    Rep Power
    5

    Default Re: tolerance and times

    Mississippi........18"........48hrs.

  6. #21
    Moderator Goldenboy is a jewel in the roughGoldenboy is a jewel in the roughGoldenboy is a jewel in the roughGoldenboy is a jewel in the rough
    Join Date
    May 2008
    Location
    Wisconsin
    Posts
    1,271
    Rep Power
    20

    Default Re: tolerance and times

    Alberta Canade--------39 inches---------------48 hours
    Florida-----------------24 inches---------------48 hours
    Georgia----------------24 inches---------------48 hours
    Illinois----------------18 inches----------------48 hours
    Indiana---------------24 inches----------------48 hours
    Maryland--------------18 inches----------------48 hours
    Michigan--------------18 inches----------------72 hours
    Minnesota------------24 inches----------------48 hours
    Mississippi------------18 inches-----------------48 hours
    North Carolina---------30 inches----------------48 hours
    South Dakota----------18 inches----------------48 hours
    Ohio------------------18 inches----------------48 hours
    Oklahoma-------------24 inches----------------48 hours
    Oregon---------------24 inches----------------48 hours
    Texas----------------18 inches----------------48 hours
    Utah-----------------24 inches----------------48 hours
    Virginia---------------24 inches----------------48 hours
    Washington----------24 inches----------------48 hours
    Wisconsin------------18 inches----------------72 hours
    Wyoming-------------24 inches----------------48 hours

  7. #22
    Junior Member jarhead is an unknown quantity at this point
    Join Date
    Jul 2008
    Posts
    28
    Rep Power
    4

    Default Re: tolerance and times

    kansas 24'' ------- 48 hours
    "BOHICA" Bend Over Here It Comes Agin

  8. #23
    Senior Member orangeboots is an unknown quantity at this point
    Join Date
    Nov 2008
    Location
    around the corner
    Posts
    209
    Rep Power
    6

    Default Re: tolerance and times

    ia 18' and 48hrs no white line....... yet

  9. #24
    Member Utilitrack is an unknown quantity at this point
    Join Date
    May 2008
    Location
    Northeast
    Posts
    83
    Rep Power
    5

    Default Re: tolerance and times

    Maine- 18"......72 Hours
    New Hampshire- 18".......72 Hours
    Vermont- 18"......48 hours
    Massachusetts- 18"......72 hours
    Rhode Island- 18"........72 hours (as of 11/1/09)
    Connecticut- 18".......48 hours (not counting day call is made)

  10. #25
    Senior Member headcipher is on a distinguished road
    Join Date
    Dec 2008
    Location
    Colorado Springs
    Posts
    266
    Rep Power
    6

    Default Re: tolerance and times

    Colorado-18".......48 hours (not counting day call is made)

  11. #26
    Moderator Goldenboy is a jewel in the roughGoldenboy is a jewel in the roughGoldenboy is a jewel in the roughGoldenboy is a jewel in the rough
    Join Date
    May 2008
    Location
    Wisconsin
    Posts
    1,271
    Rep Power
    20

    Default Re: tolerance and times

    Alberta Canade--------39 inches---------------48 hours
    Colorado--------------18 inches---------------48 hours(not counting day call is made)
    Connecticut-----------18 inches---------------48 hours(not counting day call is made)
    Florida-----------------24 inches---------------48 hours
    Georgia----------------24 inches---------------48 hours
    Illinois----------------18 inches----------------48 hours
    Indiana---------------24 inches----------------48 hours
    Maine-----------------18 inches----------------72 hours
    Maryland--------------18 inches----------------48 hours
    Massachusetts---------18 inches---------------72 hours
    Michigan--------------18 inches----------------72 hours
    Minnesota------------24 inches----------------48 hours
    Mississippi------------18 inches-----------------48 hours
    New Hampshire--------18 inches----------------72 hours
    North Carolina---------30 inches----------------48 hours
    Rhode Island-----------18 inches----------------72 hours(as of 11/1/09)
    South Dakota----------18 inches----------------48 hours
    Ohio------------------18 inches----------------48 hours
    Oklahoma-------------24 inches----------------48 hours
    Oregon---------------24 inches----------------48 hours
    Texas----------------18 inches----------------48 hours
    Utah-----------------24 inches----------------48 hours
    Vermont--------------18 inches-----------------48 hours
    Virginia---------------24 inches----------------48 hours
    Washington----------24 inches----------------48 hours
    Wisconsin------------18 inches----------------72 hours
    Wyoming-------------24 inches----------------48 hours

  12. #27
    Junior Member TMINTH is an unknown quantity at this point
    Join Date
    Apr 2012
    Location
    OH
    Posts
    22
    Rep Power
    1

    Default Re: tolerance and times

    Ohio - - - 18" (plus 1/2 width of the pipe) - - - 48 hrs.

  13. #28
    Senior Member daman1 is an unknown quantity at this point
    Join Date
    Jul 2010
    Location
    earth
    Posts
    214
    Rep Power
    4

    Default Re: tolerance and times

    California ------- 24" ------ 2 full working days.
    Contractor has to delineate (mark out) point of excavation in white (only somewhat enforced)

    Goldenboy... 39 INCHES in Alberta ?!? You sure that's not centimeters?
    Last edited by daman1; April 4th, 2012 at 08:54 PM.

  14. #29
    Senior Member The Big-E is an unknown quantity at this point
    Join Date
    Jul 2008
    Posts
    125
    Rep Power
    5

    Default Re: tolerance and times

    Florida------24"--(diameter or width of facility)--24"----- and 48 hrs. (not including day of call)

    emerg. calls are 48 hr. tickets too... but we try and make them priority as a courtesy..
    this equals never being on call for us... yay!!!

  15. #30
    Member threephase is an unknown quantity at this point
    Join Date
    Jul 2010
    Location
    Midwest, US
    Posts
    54
    Rep Power
    2

    Default Re: tolerance and times

    Missouri: 24", 48-72 hours (depends on the time of day it's called in)

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts